 |
|
 |
When an Ohio metal finishing manufacturer needed reliable level measurement of their plating baths, they turned to Flowline. The system has four tanks including a primary, two for plating and one for pump re-circulation, and each tank requires level control. The engineer was dissatisfied with prior ultrasonic level sensors, that became intermittent whenever foam developed or water drops adhered on the transducer, and thus attenuated it’s acoustic signal. For these reasons, Flowline suggested our patented UG01 ultrasonic sensor that’s unaffected by condensation. The sensors were installed in stand-pipes to separate out the surface foam. The ultrasonic sensors provide reliable level data to the PLC, which monitors the tanks and controls the process. Flowline is reliable level measurement. |
10500 Humbolt Street
Los Alamitos, CA 90720 USA
562.598.3015 p
562.431.8507 f
level.solution@flowline.com
