The general purpose vibration level switch provides high or low liquid level detection of dirty liquids or those with light to medium coating or scaling characteristics with a 1A relay output. Media examples include wastewater, diluted caustic soda and copper sulfate. For optimum performance, the sensor automatically adjusts for coating build up, and if necessary, outputs a proactive maintenance alarm to request cleaning. The submersible PP-Ryton® level switch sensor is universally mounted through the tank wall or inside the tank, and connected to a PLC or relay controller.


  • Automatic coating adjustment optimizes sensor performance
  • Submersible Ryton® sensor with polypropylene cable for corrosive liquids
  • Maintenance alarm proactively alerts user if sensor cleaning is required
  • 60VA SPST relay selectable NO or NC via power supply wiring polarity
  • Compatible with Smart Trak and Switch-Pak installation fittings


P/N Description From
LZ12-1405 Ryton, 3/4″ NPT $305.00
LZ12-1425 Ryton, 3/4″ G $310.00


Sensors and PodView indirectly, are configurable via our free WebCal PC software and one Fob USB adapter. Sensors are offered with and without Fobs. Fobs are universal and can be used to configure any WebCal compatible product. Download your free copy of WebCal in English or Chinese.



Orientation: Universal

Accuracy: ± 1mm in water

Repeatibility: ± 0.5mm in water

Supply voltage: 12-30 VDC

Consumption: 25 mA maximum

Contact type: (1) SPST relay

Contact rating: 60 VA, 1A maximum

Contact output: Selectable NO / NC

Maint. alarm: NPN transistor, 10 mA maximum

Process temp.: F: -40° to 176°, C: -40° to 80°

Pressure: 150 psi (10 bar) @ 25º C, derated @ 1.667 psi (0.113 bar) per ºC above 25º C

Sensor rating: NEMA 6 (IP68)

Sensor material: Ryton® (glass filled)

Grommet mat.: Viton®

Cable jack. mat.: Polypropylene

Cable type: 5-conductor, shielded, #24 AWG

Cable length: 10’ (3m)

Process mount: 3/4” NPT (3/4” G)

Mount. gasket: Viton®

Classification: General purpose

Compliance: CE


If you want help in selecting a sensor for your application, please submit a Level Questionnaire. An engineer will review your requirements and suggest a product solution via email.