Application

The general purpose LD32 submersible pressure level transmitter provides continuous level measurement up to 46' (14m) of water column with a 4-20 mA signal output. The LD32 liquid level sensor for dirty, foaming or slurry type liquids. Application examples include municipal sewer or storm pump lift stations.

Features

Corrosion resistant 316 SS transducer with polyurethane or ETFE cable

Strong cable design with maintenance free breather tube and vent filter

Automatic temperature compensation for accurate measurement

Rugged clog and damage resistant diaphragm design

Literature

Specifications

Range:	-SX01: 0 to 5 psi (0.34 bar), 0 to 11' (0 to 3.4m) wc -SX11: 0 to 10 psi (0.69 bar), 0 to 23' (0 to 7m) wc -SX21: 0 to 15 psi (1.0 bar), 0 to 34' (0 to 10.4m) wc -SX31: 0 to 20 psi (1.38 bar), 0 to 46' (0 to 14m) wc
Accuracy:	± 0.25% of full scale
Configuration:	None, fixed span
Supply voltage:	13 to 30 VDC
Loop resist.:	900 Ohms
Signal output:	4-20 mA, two-wire
Process temp.:	F: 0° to 200° C: -18° to 93°
Temp. comp.:	F: 0° to 180° C: -18° to 82°
Proof pressure:	2 x full scale
Trans. material:	316 SS, 316L SS & Buna-N
Trans. thread:	1/2" NPT
Cable type:	2-conductor, shielded with vent tube
Cable material:	-S1X1: Polyurethane -S2X1: ETFE
Classification:	General purpose

        

P/N	Description	Price
LD32-S101	DeltaSpan, Waste & slurry, Polyurethane, 5 psi (0.34 bar)	$ 1,050.00
LD32-S111	DeltaSpan, Waste & slurry, Polyurethane, 10 psi (0.69 bar)	$ 1,100.00
LD32-S121	DeltaSpan, Waste & slurry, Polyurethane, 15 psi (0 to 1 bar)	$ 1,150.00
LD32-S131	DeltaSpan, Waste & slurry, Polyurethane, 20 psi (1.38 bar)	$ 1,200.00
LD32-S201	DeltaSpan, Waste & slurry, ETFE, 5 psi (0.34 bar)	$ 1,250.00
LD32-S211	DeltaSpan, Waste & slurry, ETFE, 10 psi (0.69 bar)	$ 1,300.00
LD32-S221	DeltaSpan, Waste & oil, ETFE, 15 psi (1 bar)	$ 1,400.00
LD32-S231	DeltaSpan, Waste & slurry, ETFE, 20 psi (1.38 bar)	$ 1,450.00

USD list prices are subject to change without notice. Contact your Local Distributor for net price quotations.