The general purpose ultrasonic level transmitter provides continuous level measurement up to 49.2” (1.25m) with a selectable 0-5 VDC, 0-10 VDC or 976-2000 Hz frequency signal output, and is configured via our free WebCal software. Select the voltage output for interface with analog input cards. Select the frequency output for interface with discrete input cards. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is widely selected for small day tank, skid, IBC, sump and process tank level applications.


  • Continuous non-contact level measurement up to 49.2” (1.25m)
  • Selectable voltage (analog) or frequency (discrete) signal outputs
  • Configuration is fast and easy via WebCal software and USB adapter
  • Narrow 2” beam width and short 2” dead band optimized for small tanks
  • PVDF transducer and 6P polycarbonate enclosure for corrosive liquids
  • Automatic temperature compensation for accurate measurement


P/N Description From
DX10-00 1.25m (49.2”) range, 1″ NPT, w/o Fob $400.00
DX10-01 1.25m (49.2”) range, 1″ NPT, w/Fob $465.00
DX10-10 1.25m (49.2”) range, 1″ G, w/o Fob $400.00
DX10-11 1.25m (49.2”) range, 1″ G, w/Fob $465.00


WebCal software is a PC utility program that enables users to easily configure and test compatible Flowline level sensors to their measurement and control requirements. Download your free copy.


Range: 49.2” (1.25m)

Accuracy: 0.125” (3mm)

Resolution: 0.019” (0.5mm)

Dead band: 2” (5cm)

Beam width: 2” (5cm)

Configuration: WebCal® PC Windows®, USB 2.0

Memory: Non-volatile

Supply voltage: 12-24 VDC

Consumption: 0.5W

Signal output: 0-5 V, 0-10 V, 976-2000 Hz

Frequency: Sink current, 15 mA nominal

Signal invert: 5-0 V, 10-0 V, 2000-976 Hz

Signal fail-safe: Full, empty or hold last

Process temp.: F: 20° to 140°, C: -7° to 60°

Temp. comp.: Automatic

Ambient temp.: F: -31° to 140°, C: -35° to 60°

Pressure: MWP = 30 PSI (2 bar)

Enclosure rating: Type 6P, encapsulated, corrosion resistant & submersible

Encl. material: Polycarbonate

Strain relief mat.: Santoprene

Trans. material: PVDF

Cable jacket mat.: Polyurethane

Cable type: 6-conductor, shielded

Cable length: 48” (1.2m)

Process mount: 1” NPT (1” G)

Mount gasket: Viton®

Classification: General purpose

Compliance: CE, RoHS

Approvals: cFMus


If you want help in selecting a sensor for your application, please submit a Level Questionnaire. An engineer will review your requirements and suggest a product solution via email.