| EchoPod For Chemical Feed Level Control and Measurement |
|
 |
Chemical feed and small tank systems use float or conductance level switches that fail due to contact with corrosive or sticky liquids. The associated maintenance, replacement and downtime costs are many times higher than the switch cost. You requested a cost-effective, small sensor for drum, IBC and OEM skid tank level measurement. |
|
EchoPod is a non-contact level switch, control and measurement solution designed to replace multi-point float switches in small tank chemical feed or skid applications. The multi-function sensor has four relays with embedded logic for pump and valve control. EchoPod is loop powered with a 4-20 mA measurement output. |
|
| EchoSafe For Explosion Proof Level Measurement |
|
 |
Process markets such as petrochemical, energy, municipal wastewater treatment, pulp / paper and mining are hazardous environments that require explosion proof or intrinsically safe measurement. You requested an explosion proof ultrasonic level transmitter for use in XP classified areas or where metal enclosures are preferred. |
|
The explosion proof EchoSafe is FM approved for hazardous storage, day tank or sump level measurement and control applications. Certified for Class I, Div. I, Groups A, B, C, D, Class II and III, Div. 1, Groups E, F, G environments. EchoSafe features a rugged windowed enclosure and PVDF transducer for harsh corrosive liquids. |
|
| FluidWell For Explosion Proof Level Indication |
|
 |
Local indication and control is an important part of many explosion proof level systems because the conduit, installation and down-time costs are higher than general-purpose environments. You requested an explosion proof meter for use with our EchoSafe level transmitter as a total XP measurement and indication solution. |
|
The explosion proof FluidWell meter is UL and CSA approved for level indication in a hazardous environment. Certified for Class I, Div. I, Groups C and D; Class II, Groups E, F, G; Class III environments, the wall mounted, loop powered meter features a 5-1/2 digit main display and 11-digit secondary display with proportional span graph. |
|
| DeltaSpan For Waste and Storm Level Measurement |
|
 |
Depending on their location and process, municipal lift stations collect considerable debris or surface foam that may impact the performance of an ultrasonic sensor. You requested a pressure level transmitter for the measurement of debris or foam filled waste or storm water lift stations. |
|
Constructed of 316 SS, the submersible DeltaSpan level transmitter is designed for storm wastewater applications where ultrasonic is not attractive due to foam or debris. The clog-resistant design features a diaphragm shield, surge protection and filtered vent to block particulates. |
|
| Commander For Multi-Channel Program Relay Control |
|
 |
Bulk storage tanks, day tanks, chemical feed tanks and lift stations are often located together to reduce installation and control costs. You requested a multi-channel programmable logic relay controller with a bright graphic display, advanced relay control functions and data-logging that can be configured for up to 4 tanks within a distributed control systems. |
|
The Commander programmable logic relay controller has 4 analog input channels and 6 programmable relays for multi-tank level applications. The DIN controller features a backlit LCD graphic display, push button configuration, data logging with removable MicroSD card and a wide array of pump and valve control functions. |
|
| EchoSwitch II For Waste Sump and Day Tank Level Control |
|
 |
Industrial waste sumps and chemical day tanks contain coating or corrosive liquids that often cause contact sensors to fail. These applications also require pump or valve control for automatic fill or empty. You requested a non-contact level controller with integral display and push button configuration that's easy to use |
|
The EchoSwitch II ultrasonic level switch is AC powered with 3 programmable relays and a wide range of control functions. The LCD display and intuitive push button menu make setup fast and easy. From simplex to lead-lag, alternation to duplexing control, EchoSwitch II does it all with reliable, non-contact level detection. |
|
| EchoSonic II For General Purpose Level Measurement |
|
 |
Most level transmitters are burdened in size and cost with display and push button hardware that's only used once. PC configuration offers other features and its market acceptance grows each year. You requested a non-contact, level transmitter for bulk applications that's small, easy to configure and extremely cost competitive. |
|
The EchoSonic II ultrasonic level transmitter is designed for bulk chemical, water and wastewater applications. PC configured with our WebCal software, users enjoy PDf wiring schematics and configuration file management tools. This simple, general-purpose sensor delivers robust, non-contact level measurement. |
|
| DataView II For Single-Channel Level Indication and Control |
|
 |
Single-channel meters for general purpose, level indication and control are an important part of our offering. You requested a 6-digit, 2-line backlit display with expanded viewing and linearization functions. You also wanted easy configuration, a sensor power supply capable of supporting 2 or 3-wire transmitters and a repeater output. |
|
The DataView meter has a large 0.6" main display and 0.46" secondary display with 4 relays. The 32-point linearization function enables volumetric measurement and control. The power supply supports 2 or 3-wire transmitters with 4-20 mA repeater. The simple menu and backlit display makes configuration easy, day or night. |
