Please rate Flowline.com
Is the information on this page what you were looking for?
Yes    No
How easy was it to find this page?
Worst     Best
How helpful is the information on this page?
Worst     Best
How complete is the information on this page?
Worst     Best
How user friendly is Flowline.com?
Worst     Best
Please give us your feedback
How can we make this site better?
Join email list (optional)
First Name:  
Last Name:  
Email:            
Browse the Products
Flow Switches

Description Specification
The general purpose liquid or gas flow switch is offered in PP or PVDF with a relay for PLC, SCADA or alarm interface. The flow switch is broadly suited for relatively clean, non-coating media in pipe or ducting. The adjustable set point makes calibration fast and simple.


Set point:
0.04 to 3 fps (0.012 to 0.91 mps)
Contact type:
(1) SPST relay
Supply voltage:
12-36 VDC
Process mount:
3/4" NPT (3/4" G)
Switch-Pro with Compact Relay Controller
Description Specification
The general purpose switch provides a total solution for low-flow pump or process protection with an integral relay controller and optional strobe flash alarm. Offered in liquid and gas configurations, the flow switch is broadly suited for relatively clean, non-coating media in pipe or ducting.
Set point:
0.04 to 3 fps (0.012 to 0.91 mps)
Contact type:
(1) SPDT relay
Supply voltage:
120 / 240 VAC
Process mount:
3/4" NPT (3/4" G)
Switch-Pro with Compact Junction Box
Description Specification
The general purpose liquid or gas flow switch is offered in PP or PVDF with a relay for PLC, SCADA or alarm interface. Provided with a compact junction box for integral wiring termination, the flow switch is broadly suited for relatively clean, non-coating media in pipe or ducting.
Set point:
0.04 to 3 fps (0.012 to 0.91 mps)
Contact type:
(1) SPST relay
Supply voltage:
12-36 VDC
Process mount:
3/4" NPT (3/4" G)
Flow Switch Compact Relay Controller
Description Specification
The general purpose compact relay controller accepts 1 sensor input with 1 relay output for low-flow pump or process protection. Package the NEMA 4X controller with our liquid or gas flow switch sensors. Its compact pump protection made simple.
Contact type:
(1) SPDT relay
Sensor inputs:
(1) flow switch
Supply voltage:
120 / 240 VAC
Enclosure rating:
IP65
Flow Switch Remote Relay Controller
Description Specification
The general purpose remote relay controller accepts 2 sensor inputs with 2 relay outputs for low-flow pump or process protection. Package the 35 mm DIN rail controller with our liquid or gas flow switch sensors. Its remote pump protection made simple.
Contact type:
(1-2) SPDT relays
Sensor inputs:
(1-2) flow switches
Supply voltage:
120 / 240 VAC


Home | Search | Introduction | About Flowline | What's New | Solutions Wheel | Contact Flowline
Selection Guide | Application Guide | Browse the Products | Request Catalog | New Products
My Distributor | FAQs | Tech-Tips | Case Studies | Flowline News
Glossary | Success Stories | Technical | Chemical
Request Quote | Registration | White Papers

The Flowline Liquid Intelligence and Digital Infinity logo's are all trademarks and/or service marks of Flowline. No trademark or service mark license is granted in connection with the materials contained in the Flowline web site. This web site and all of the information it contains are provided as is without warranty of any kind, whether expressed or implied. All implied warranties, including, without limitation, implied warranties of merchantability, fitness for a particular purpose, and non-infringement, are hereby expressly disclaimed. No reproduction or republication without the prior written permission of Flowline. Specifications subject to change without notice.

©1999-2009 Flowline Liquid Intelligence
10500 Humbolt Street, Los Alamitos, CA 90720 USA
Phone: (562) 598-3015 • Fax: (562) 431-8507 • Email: levelsolutions@flowline.com