Please rate Flowline.com
Is the information on this page what you were looking for?
Yes    No
How easy was it to find this page?
Worst     Best
How helpful is the information on this page?
Worst     Best
How complete is the information on this page?
Worst     Best
How user friendly is Flowline.com?
Worst     Best
Please give us your feedback
How can we make this site better?
Join email list (optional)
First Name:  
Last Name:  
Email:            
Browse the Products
DataView™ Single-Channel Meter with Relays
Application
The general purpose meter displays engineering units with one 4-20 mA or 0-10 VDC transmitter input channel and is offered in three configurations with optional 2 or 4 relays, 4 or 8 set points and an isolated 4-20 mA repeater. Each relay can be configured on a single set point or latched on two set points for automatic fill or empty control including duplexing. For field mount installations, order the single or two meter NEMA box.
Features
Bright 6-digit LED main display and secondary unit display with relay status indicators
1/8 DIN enclosure with NEMA 4X faceplate and shallow depth case
32-point linearization function for volumetric tank measurement
Non-volatile memory with security password protected lock out
(91 mm) Isolated 4-20 mA repeater output with 40 mA internal power supply
Tech Tip
For field mount installation in a rugged NEMA 4X, corrosion resistant PC windowed enclosure, order the LM92 single meter or the LM93 two meter box. Each comes with precut panels and mounting hardware. It's indication and control made simple.


                      
Specifications
Display type:
LED, 6-digit
Display units:
Engineering
Display height:
Main: 0.6" (15 mm) high
Second: 0.46" (12 mm) high
Decimal point:
Floating
Display output:
-99999 to 999999
LED indication:
Relay status
User interface:
Four push button
Linearization:
2-32 point function
Memory:
Non-volatile
Sensor input:
(1) 4-20 mA or 0-10 VDC transmitter
Supply voltage:
85-265 VAC @ 50-60 Hz.
Consumption:
20 watts max.
Sensor supply:
24 VDC ± 5% @ 200 mA
Repeater ouput:
4-20 mA, 24 VDC ± 5% @ 40 mA
Contact type:
12_1: (2) SPDT (Form C)
14_1: (4) SPDT (Form C)
Contact rating:
3A @ 30 VDC or 250 VAC resistive load
Ambient temp.:
-40° to 149°
C: -40° to 65°
Enclosure type:
1/8 DIN panel meter
Enclosure rating:
NEMA 4X (IP65) faceplate
Enclosure mat'l:
Polycarbonate
Compliance:
CE: EN61010-1:2001
Classification:
General purpose
Approvals:
cULus, UL508
Order
Compatible Products
EchoSpan™ LU81/83/84 Two-Wire Ultrasonic Level Transmitter
EchoSpan Transmitter The general purpose two-wire ultrasonic transmitter provides non-contact level measurement up to 32.8' or 10m, and is ideally suited for challenging ultrapure, corrosive or waste liquids. Push button calibrated, the EchoSpan features an integrated display with 6 digit LCD readout.
EchoSonic® II LU27/28/29 Two-Wire Ultrasonic Level Transmitter
The general purpose two-wire ultrasonic transmitter provides non-contact level measurement up to 32.8' (10 m), and is well suited for challenging ultrapure, corrosive, slurry or waste liquids. Configured via our WebCal software, EchoSonic II eliminates target calibration.
EchoPod® DL14 1.25m Ultrasonic Multi-Function Transmitter, Switch & Controller
The general purpose, ultrasonic sensor provides non-contact level detection up to 49.2" (1.25m) with 4 SPST 60 VA 1A relays and a two-wire 4-20 mA level measurement output. Each relay can be configured on a single set point alarm or latched on two sets for automatic fill or empty in simplex or duplex control modes with fail-safe logic.
EchoPod® DL24 2.5m Ultrasonic Multi-Function Transmitter, Switch & Controller
The general purpose, ultrasonic sensor provides non-contact level detection up to 98.4" (2.5m) with 4 SPST 60 VA 1A relays and a two-wire 4-20 mA level measurement output. Each relay can be configured on a single set point alarm or latched on two sets for automatic fill or empty in simplex or duplex control modes with fail-safe logic.
EchoPod® DL10 1.25m Ultrasonic Transmitter with 4-20 mA Output
The general purpose, DL10 ultrasonic sensor provides non-contact level measurement up to 49.2" (1.25m) with a 4-20 mA output. The DL10 directly replaces contact measurement sensors connected to a PLC analog input card for easy design conversion or field retrofit. The two-wire, 4-20 mA output is ideal for longer signal distances up to 1000'.
EchoPod® DX10 1.25m Ultrasonic Sensor with Voltage & Frequency Output
The general purpose, DX10 ultrasonic sensor provides non-contact level measurement up to 49.2" (1.25m) with a 0-5 VDC, 0-10 VDC or 976-2000 Hz. frequency output. Select the voltage output to directly replace a contact measurement sensor connected to a PLC analog input.
FloaTek™ LV55 Two-Wire Float Level Transmitter
FloaTek Transmitter The general purpose two-wire, float transmitter provides contact level measurement up to 8' or 2.4m, and is ideally suited for relatively clean water, light weight oil or diluted corrosive liquids. The transmitter is typically selected for hight temperature and/or pressure process tank applications. Media examples include boiler water and cooking oil.
DeltaSpan™ LD30 Side Mounted Pressure Transmitter
The general purpose two-wire pressure transmitter is offered in two termination packages and provides contact level measurement up to 69' or 21.1m of water column. Select the -S_01 for cable termination or the -S_11 for conduit termination with an integral junction box.
DeltaSpan™ LD31/32 Submersible Pressure Transmitter
The general purpose two-wire pressure transmitter is offered in two configurations for different liquid types and provides contact level measurement up to 46' or 14m of water column. Select the LD31 for clean or relatively clean water, light weight oils and diluted chemical media.


Home | Search | Introduction | About Flowline | What's New | Solutions Wheel | Contact Flowline
Selection Guide | Application Guide | Browse the Products | Request Catalog | New Products
My Distributor | FAQs | Tech-Tips | Case Studies | Flowline News
Glossary | Success Stories | Technical | Chemical
Request Quote | Registration | White Papers

The Flowline Liquid Intelligence and Digital Infinity logo's are all trademarks and/or service marks of Flowline. No trademark or service mark license is granted in connection with the materials contained in the Flowline web site. This web site and all of the information it contains are provided as is without warranty of any kind, whether expressed or implied. All implied warranties, including, without limitation, implied warranties of merchantability, fitness for a particular purpose, and non-infringement, are hereby expressly disclaimed. No reproduction or republication without the prior written permission of Flowline. Specifications subject to change without notice.

©1999-2009 Flowline Liquid Intelligence
10500 Humbolt Street, Los Alamitos, CA 90720 USA
Phone: (562) 598-3015 • Fax: (562) 431-8507 • Email: levelsolutions@flowline.com